Switching On And Off; Starting A Programme, Programme Sequence Display, End Of A Programme - Miele G 676 Operating Instructions Manual

Switching on and off

Switching on and off
Switching on
Close the door.
Turn on the stopcock, (if previously
closed).
Press the "On/Off"-switch (14).
The control light "On" (19) lights up.
Starting a programme
Turn the Programme selector switch
(20) clockwise or anti-clockwise to
the required programme.
The programme starts.
Within the first 30 seconds after start-
ing a programme select the addi-
tional option "Top Solo" if required
(see section "Additional options").
Do not cancel a programme prema-
turely. This can cause internal pro-
gramme steps such as reactivating
the softener to be left out.
32
Programme sequence display
(19)
The control light "On" lights up, when
the dishwasher is switched on.
The control light "Wash/Rinse" lights up
in the PRE-WASH, MAIN WASH, IN-
TERIM RINSE and FINAL RINSE pro-
gramme section.
The control light "Drying" lights up dur-
ing the DRYING programme section.
End of a programme
When the control light "End" (19) lights
up in the programme sequence dis-
play, the programme has finished.
The dishwasher can now be unloaded
(see section "Removing the load").
If it is left closed, the fan will continue
for a few more minutes to reduce any
remaining moisture.
This is recommended if the crockery is
not required immediately.