Miele G 676 Operating Instructions Manual page 57

Installing a freestanding dishwasher
Adapting the height of the decor
panel supplied
Mark the measurement "X" on the left
and right hand side of the decor
panel and on the decor frame strips.
Take off and shorten the decor frame
strips (see Step 2), the decor panel
and the packing card.
Installing a freestanding dishwasher
Establishing the height of a new
decor panel
The decor panel supplied with the dish-
washer can be exchanged for a panel
to match your kitchen decor.
The new panel must have the following
measurements:
Width:
587 mm
Thickness:
Minimum 1 mm and maximum 4 mm.
The packing card originally supplied
behind the decor panel must be
removed for new panels with a thick-
ness of more than 2 mm.
Height:
604 mm minus "X" mm
Mark the measurement "X" on the left
and right hand side of the decor
frame.
Take off the decor frame strips (see
Step 2), the decor panel and the
packing card, and shorten the decor
frame strips, and the packing card (if
used).
57