Miele G 676 Operating Instructions Manual page 70

Installing integrated "i" Dishwashers
Installing integrated "i" Dishwashers
Adjust the fixing bracket
The long holes in the machine door
outer panel must be aligned with the
matching markings on the template.
On the template
of the top edge of adjacent kitchen
base unit doors.
Take off the fixing bracket.
Lay the door front down with the rear
side facing upwards.
70
D
:
E
mark the height
Lay the bracket on the rear side of
the door front and adjust so that:
– the marks on the template for the
upper edge of the adjacent base
unit doors match the top edge of the
door front.
– The fixing bracket must be the same
distance from the left and right hand
side edges of the door front.
Use strips of adhesive tape to hold
the bracket in this position.