Miele G 676 Operating Instructions Manual page 59

Installing a freestanding dishwasher
Bow the panel slightly, draw out from
under the control facia and remove.
Shorten the decor frame strips, and
the packing card (if used) by meas-
urement "X".
When using the decor panel sup-
plied: Draw a line to join the two
marks for measurement "X". Shorten
the decor panel along this line.
Note:
When the decor frame strips are short-
ened, the hook at the lower edge is cut
off. It is however only needed for full
length decor frame strips to give addi-
tional fixing to the door outer panel.
Installing a freestanding dishwasher
Loosen the screws
outer panel, but do not screw out
completely.
Push the lower edge of the adapter
plate
ment "X") upwards far enough for its
lower edge to be in a line with the
lower edge of the adjacent kitchen
unit door front(s).
Tighten the screws
plate.
b
c
(corresponding to measure-
b
in the door
in the adapter
59