Maintenance
6.5 Major Internal Components
The Micro-fuel Cell is accessed by unlatching and swinging open the
front panel, as described earlier. Other internal components are accessed by
removing the rear panel and sliding out the entire chassis. See Figure 6-5,
below. The gas piping is illustrated in Figures 2-4 and 2-5 and the major
electronic components locations are shown in Figure 2-6, in Chapter 2.
WARNING: S
ee warnings on the title page of this manual
Figure 6-5: Rear Panel Removal
(Remove only those screws marked with an X)
Teledyne Analytical Instruments
Preamp
0
OK
1
Zero too high
2
Amplifier output doesn't match test input
3
Both Failed
3000TA-XL-EU
.
80