Table of Contents
Advertisement
NDIR Gas Analyzer
•
Input Buttons—4 push buttons are installed on the front panel
and are used to enter data and set operational modes.
•
Flowmeter—an integral flowmeter is mounted on the front
panel for monitoring the sample flow through the instrument.
•
Power Switch—an off/on switch is mounted on the front panel
for powering up the instrument.
•
Sample Pump Switch (IR7000P only)—this switch controls
the operation of the sample pump on portable models.
•
Sample Pump Connector (IR7000P only)—a quick
disconnect nylon fitting is mounted on the front panel of
portable models for attaching the sample probe to the
instrument.
.
Teledyne Analytical Instruments., - Rev. 3
Introduction 1
7
Advertisement
Table of Contents
