To Change The Focus Motor - ACR Electronics RCL-600 Trouble Shooting And Parts Replacement Manual

16. Replacement of the focus motor
16-1 Use the following tools
・Phillips head screw driver
・6mm Hexagonal wrench
・7mm flat spanner
・Focus motor (TE-20-69E-500S)
16-2 Replacement procedure
Remove the power head according to the instruction of page 7 "How to remove the power head".
1)
2)
Remove the connector as indicated in picture 57
3) Loosen and remove 2 screws as indicated in picture 58.
Replace the focus motor.
.
Picture 57
Picture 58
38