To Check The Output (Rotation) Of Pcb Pp-207A - ACR Electronics RCL-600 Trouble Shooting And Parts Replacement Manual

8. Method to check the print circuit board PP-207A (Rotation)
8-1 Use the following tools
・Phillips head screw driver
・4mm Hexagonal wrench
・8 mm Box wrench
・DC Multimeter
8-2 Procedure
1) Remove the search light and place upside down on a suitable surface.
2)
Loosen and remove 8 screws as indicated in picture 25. Carefully lift the bottom cover off the base.
8-3
Turn on the power source on remote control panel and move the joy stick to the right or left.
Measure approx. 8V between terminals 1 and 2 of CN3 where is the arrow mark on picture 26.
Picture 25
Picture 26
20