To Check The Focus Motor - ACR Electronics RCL-600 Trouble Shooting And Parts Replacement Manual

15. Procedure to check the focus motor
15-1Use the following tools
・Phillips head screw driver
・6mm Hexagonal wrench
・7mm flat spanner
15-2 Procedure
Remove the power head according to the instruction on page 7 "How to remove the power head".
1)
2)
Loosen and remove 2 screws as indicated. Remove the card edge
connector from the inside of the search light. (Refer picture 54)
3)
Insert the card edge connector, which was removed, into plug-in P.C.B.
as indicated in picture 55
Plug-in P.C.B.
Picture 54
Picture 55
36