To Replace The Elevation Motor - ACR Electronics RCL-600 Trouble Shooting And Parts Replacement Manual

10. Method to replace the elevation motor
10-1 Use the following tools
・Phillips head screw driver
・6mm Hexagonal wrench
・Flat screw driver
・7mm Spanner
・Pliers
・Elevation motor (TE-24SM-12-256S)
10-2 Procedures to check motor.
Remove the power head according to the instruction of page 7 "How to remove the power head".
1)
2)
Remove the spring with pliers where indicated in picture 30.
3) Remove center connector as indicated in picture 31.
Picture 30
Picture 31
23