Call Forward - Remote (I Am Here) - Mitel 5312 User Manual

5312/5324 IP Phones User Guide
To turn Call Forward on and off (once it has been programmed):
1. Press ( MENU ).
2. Press # or the No softkey until "Call Forwarding?" appears.
3. Press * or the Yes softkey .
4. Press # or the No softkey or the Next softkey until the type of Call Forward appears.
5. Do one of the following:
•
On a 5312 IP Phone, press *.
•
On a 5324 IP Phone, press the Change softkey, and then the TurnOn or TurnOff softkey.
To turn off Call Forwarding and delete the destination number, press the Del softkey.
6. Press ( MENU ) to exit.

Call Forward - Remote (I am Here)

To forward calls from a remote station to your current location:
1. Press ( MENU ).
2. Press # or the No softkey until "Call Forwarding?" appears.
3. Press * or the Yes softkey.
4. Press # or the No/Next softkey until "I Am Here" appears.
5. Press * or the Yes softkey.
6. Dial the extension of the remote station.
If you make an error while dialing, use the # or the <— softkey to backspace and correct the
number.
7. Press ( DOWN ) or the Save softkey.
To cancel Call Forward – I'm Here from the station that set it:
1. Lift the handset.
2. Dial appropriate feature access code.
3. Dial the extension of the remote station.
4. Hang up.
To cancel Call Forward – I'm Here from the phone that was forwarded:
1. Press ( MENU ).
2. Press # or the No softkey until "Call Forwarding?" appears.
3. Press * or the Yes softkey.
4. "Always?" *, press * or the Change softkey, then press # or the Del softkey.
5. Press ( MENU ) to exit.
16