Place The Conference Unit In Presentation Mode; Exit The Conference; Mute The Conference Unit; Using The 5310 Conference Unit Without A Mouse - Mitel 5312 User Manual

5312/5324 IP Phones User Guide

Place the conference unit in Presentation mode

Presentation Mode is used when only one individual is speaking to a group. If another member in the
group wishes to speak, you must disable Presentation Mode. Presentation Mode minimizes
extraneous noise.
To place the conference unit in Presentation mode
•
Press Presentation Mode key on the mouse.

Mute the Conference Unit

To mute the conference unit so that conversation in the meeting room cannot be heard by individuals
being conferenced:
•
Press (Mute key) on the mouse.

Exit the conference

•
Press Power key on the mouse.

Using the 5310 Conference Unit without a Mouse

Use the procedures below if you 5310 Conference Unit does not have a mouse attached. The 5324
IP Phone will activate the 5310 Conference Saucer when it detects that the Conference Module has
been installed in the back of the phone.

To start a Conference

•
Press SPEAKER key

Adjust the conference unit volume

•
Press Volume Up or Volume Down.
Mute the conference unit
To mute the conference unit so that conversation in the meeting room cannot be heard by individuals
being conferenced:
•
Press (Mute key).
Exit the conference
•
Hang up.
40
or just start dialing.