To Examine Extension Lock Passwords; Tone Protection; To Program An Extension To Receive Call Waiting Tones; To Protect An Individual Call From Call Waiting Tones - Mitel 3000 Administrator's Manual

•
Select 'Extension Lock'
•
Select 'Change the lock code'
•
Dial the existing 3-digit Lock Password. The default password is 123
•
Dial your new 3-digit Lock Password. The new Lock Password will not be displayed
when entered.
Press the Hands-free Key to finish programming.
From a standard telephone, the code is 714.

To examine Extension Lock Passwords

•
From the Programming Extension, press the PROGRAM Key
•
Press the Scroll Down Key ( ) until 'System programming' is displayed
•
Select 'System programming'
•
Enter the System Programming Password and select 'Extensions'
•
Select 'Examine passwords'
•
Select 'Extension lock password'
•
Select the extension. The Lock Password is briefly displayed on the top line of the
display.
Press the Hands-free Key to finish programming.

TONE PROTECTION

As described on page 43, extensions may present a busy extension with a Call Waiting tone,
provided the busy extension is not protected against receiving Call Waiting tones.
default, all extensions are protected against receiving Call Waiting tones, except extension
20. However, you may program extensions to receive Call Waiting tones.

To Program an extension to receive Call Waiting tones

•
From the Programming Extension, select the PROGRAM Key
•
Press the Scroll Down Key ( ) until 'System programming' is displayed
•
Select 'System programming'
•
Enter the System Programming Password and select 'Extensions'
•
Press the Scroll Down Key ( ) until 'Tone protect' is displayed
•
Select 'Tone Protect'
•
Select the extensions you wish to allow receive Call Waiting tones. A ◊ is displayed
beside those extensions allowed to receive Call Waiting tones, and a ♦ is displayed
beside those extensions protected against receiving Call Waiting tones. (By default, all
extensions will have a ♦ displayed except extension 20).
Press the Hands-free Key to finish programming.

To protect an individual call from Call Waiting tones

If your extension can receive Call Waiting tones, you may protect each call on an individual
basis from interruption.
•
When you are on a call, select 'Tone protect' on the display.
From a standard telephone, the code is R725.

REMINDER CALL

This feature enables you to set your extension to ring at a given time.
Mitel 3000 Australia Administrator's Manual
By
59