Recalling Memory Data - A&D UA-787 Plus Instruction Manual

Note: This device stores the last sixty measurements in memory
automatically. The data is retained as long as the batteries
are in the device. When you remove the batteries or the
batteries are drained, the data will be erased.
1. Press the MEMORY button.
2. The date and the most recent data are
displayed.
3. When the MEMORY button is pressed while
data is displayed, the previous data is
displayed.
4. After the last data is displayed, the display
goes blank.
5. Press and hold the MEMORY button until
the " " (memory) mark blinks to clear the
stored data.
Note: Pressing the START button while the memory data is displayed
initiates the UA-787

Recalling Memory Data

to start taking a measurement.
English 11
Press the MEMORY button
Date
Data