Recalling The Memory Data - A&D UA-767S Instruction Manual

Should the device detect a condition that is abnormal, it will stop the
measurement and display an error symbol. Refer to page 6 for the
description of symbols.
This blood pressure monitor is intended for use by adults only. Consult
with your physician before using this device on a child. A child should not
use this device unattended.

Recalling the Memory Data

Note: This device stores the last 60 measurements in memory.
1. When nothing is displayed, press
and hold the
recall the stored data.
2. Release the button when displaying
the average data.
3. The data number and stored data
are automatically displayed in order
from the last measurement.
4. The display will turn off automatically
after all data is displayed.
Note: If you press the
while recalling data, the device
turns off.
button to
_START_
button
_START_
English 14
Press and
START
hold
Average of
all the data
Most recent data
Last data (Oldest)
button
Average systolic
Average diastolic
Average pulse
Systolic
Diastolic
Pulse
Systolic
Diastolic
Pulse