Original Sizes Difficult To Detect - Ricoh 3030 Operating Instructions Manual

❖ Inch Version
Note
❒ During Immediate Transmission, the length of the scanning range can be-
come narrower than 1200 mm (47"), depending on the resolution as well as
the settings on the destination machine.
❒ If a paper misfeed occurs when using a custom size original, program a cus-
tom scanning size that has a vertical-size that is nearly equal to the actual size
of the original. To do this, open the Facsimile Feature menu and set a new
scan area in "Program/Change/Delete Scan Size". Then, in the standby
screen select the scanning size you programmed and scan the original again.
See "Setting a Scan Area".
Reference
p.38 "Setting a Scan Area"
"Facsimile Features", General Settings Guide

Original Sizes Difficult to Detect

The machine has difficulty detecting the size of the following kinds of originals.
(When this happens, the receiving machine may not select print paper of the cor-
rect size.)
• documents placed on the exposure glass of sizes other than those listed in the
following table
• originals with index tabs, tags, or protruding parts
• transparent originals, such as OHP transparencies or translucent paper
• dark originals with dense text or drawings
• originals that contain areas of solid print
• originals that have solid print around their edges
• originals with glossy surfaces
• bound originals of more than 10 mm (0.3") in thickness, such as books.
The following paper sizes are automatically detected in facsimile mode.
Placing Originals
1
ARY009S
45