Ricoh 3030 Operating Instructions Manual page 125

G
To confirm the transmission results by e-mail notification, select [Yes] for
the E-mail TX Results function.
If the sender's e-mail address is registered, you can send the transmission re-
sult to the registered e-mail address.
H
Press [OK].
The display returns to that of step
The selected sender's name appears above [Sender Settings]. The sender name
is displayed in up to 14 characters, followed by an ellipsis (. . . ).
I
Press [OK].
The standby display appears.
To check the settings, press [Transmission Mode].
J
Specify the destination, and then press the {Start} key.
C
.
Sender Settings
2
115