Ricoh 3030 Operating Instructions Manual page 64

Transmission
A
Press [Select Line].
1
B
Select the line you want to use.
When one optional extra G3 unit is installed
If you select "G3 Auto", the machine will use any available line. This increas-
es efficiency.
C
Press [Exit].
The standby display appears.
Note
❒ When you install the extra G3 interface unit, you can specify the line port
home position under Gen. Settings/ Adjust in the Facsimile Features
menu.
❒ When sending a fax, you can select the line port if dialing with the number
keys or Chain Dial.
❒ A maximum of three simultaneous communications are possible. You can-
not perform three Immediate Transmissions simultaneously.
❒ If three communications are in progress, the display shows the first com-
munication that was initiated.
Reference
"Facsimile Features", General Settings Guide
54