Changing A Program Name - Ricoh 3030 Operating Instructions Manual

Appendix

Changing a program name

Follow these steps to change a program name.
A
Make sure that the machine is in facsimile mode and the standby display
is shown.
If the standby display is not shown, press the {Facsimile} key.
B
Press the {Program} key.
C
Press [Change Name].
7
D
Select the program number of the name you want to change.
E
Enter a new program name, and then press [OK].
Press [Cancel] to cancel the change, and proceed to step
F
Press [Exit].
The standby display appears.
282
ZLFS310N
F
.