Mac Os - Installing The Postscript 3 Printer Driver And Utilities - Savin 2045e Operating Instructions Manual

When connecting with IEEE 1394
• The port on the optional IEEE
1394 interface board and the
IEEE 1394 port on the computer
are connected using an interface
cable (Windows 2000/XP, Win-
dows Me).
Note
[SCSI print (SBP-2)] must be set to
Active and [Bidirectional SCSI
print] must be set to ON in [IEEE
1394] on the [Interface Settings]
tab in the machine's System Set-
tings.
In Windows Me, [Enable bi-direc-
tional support for this printer] must
be selected in [Spool Settings] on
the [Details] tab in RPCS™ print-
er driver.
In Windows 2000/XP, [Enable bi-
directional support] must be select-
ed, and [Enable printer pooling]
must not be selected on the [Ports]
tab in RPCS™ printer driver.
When connecting with USB 2.0
• The port on the optional USB 2.0
interface board and the USB
port on the computer are con-
nected using a USB interface ca-
b l e ( W i n d o w s 9 8 S E / M e ,
Windows 2000/XP).
Note
In Windows 98 SE/Me, [Enable
bi-directional support for this print-
er] must be selected in [Spool Set-
tings] on the [Details] tab in
RPCS™ printer driver.
In Windows 2000/XP, [Enable bi-
directional support] must be select-
ed, and [Enable printer pooling]
must not be selected on the [Ports]
tab in RPCS™ printer driver.
Mac OS - Installing the
PostScript 3 Printer Driver and
Utilities
It is necessary to install a printer driv-
er and a PPD file to print from a Mac-
intosh.
Follow this procedure to install a
printer driver and a PPD file on Mac-
intosh running OS 8.6 or later ver-
sions up to 9.2, and Mac OS X Classic
mode.
Note
For installation under Mac OS X
(v10.1.x), see p.31 "Mac OS X - In-
stalling the PostScript 3 Printer
Driver".
A
Insert the CD-ROM into the CD-
ROM drive.
B
Double-click the CD-ROM icon.
C
Double-click the [Mac OS 8 and 9]
folder.
D
Double-click the [PS Driver] folder.
E
Double-click the folder of the lan-
guage you use.
F
Open [Disk 1], and then double-
click the installer icon.
The PostScript 3 printer driver in-
staller window appears.
G
Follow the instructions on the
screen.
H
Double-click [Extensions] in [Sys-
tem Folder].
I
Double-click [Printer Descriptions].
J
Double-click the CD-ROM icon
on the desktop.
Installing the Software
29
2