Installing The Software; Auto Run - Savin 2045e Operating Instructions Manual

Installing the Software

This manual assumes you are familiar
with general Windows procedures
and practices. If you are not, see the
operating instructions that come with
Windows for details.
The procedure for installing the print-
er driver depends on the connection
with the computer. With a parallel or
Ethernet connection, Quick Install is
also available. With a wireless LAN
connection, check the machine and
computer are communicating proper-
ly and then install the printer driver
by following the procedure used for
an Ethernet connection.
• For details about the parallel/Eth-
ernet connection, see p.16 "Quick
Install" or p.18 "Installing the PCL
6/5e and RPCS™ Printer Driver".
• For details about the USB connec-
tion, see p.32 "Installing the Print-
er Driver Using USB".
• For details about the IEEE 1394
connection, see p.34 "Installing the
Printer Driver Using IEEE 1394".

Auto Run

Inserting the CD-ROM into the CD-
ROM drive starts the installer auto-
matically. The installer helps you in-
stall the following printer drivers and
software easily.
Note
If "plug and play" starts, click
[Cancel] in [New Hardware Found],
[Device Driver Wizard] or [Found New
Hardware Wizard] dialog box, and
then insert the CD-ROM. The [New
Hardware Found], [Device Driver Wiz-
ard] or [Found New Hardware Wizard]
dialog box appears depending on
the system version of the Windows
95/98/Me, Windows 2000/XP, or
Windows NT 4.0.
Auto Run might not work auto-
matically with certain operating
system settings. If this happens,
launch "Setup.exe", located on the
CD-ROM root directory.
If you want to cancel Auto Run,
hold down the {SHIFT} key (if your
operating system is Windows
2 000/X P, hold down the left
{SHIFT} key) while inserting the
CD-ROM. Keep the {SHIFT} key
held down until the computer has
finished accessing the CD-ROM.
Limitation
If your operating system is Win-
dows 2000/XP or Windows NT
4.0, installing software using Auto
Run requires Administrator per-
mission. When you install soft-
ware using Auto Run, log on using
an account that has Administrators
permission.
Installing the Software
15
2