Initializing the Hard Disk
When initializing the machine's hard disk using the Printer Utility for Mac, only
the fonts related to PostScript will be deleted. Before initializing, make sure to
have an idea of the fonts that are already stored in the machine.
Important
❒ When initializing the machine's hard disk from the machine's control panel,
all the data in the machine, such as the document server data, will be deleted.
Before initializing, make sure to check the data on the hard disk drive.
A
Select [Initialize Printer's Disk...] on the [File] menu.
The confirmation message appears.
Note
❒ To cancel initialization, click [Cancel].
B
Click [Execute].
Initializing starts.
Important
❒ Do not turn off the main power switch until initialization is completed,
otherwise it might damage the hard disk drive.
C
When the completion message appears, click [OK].
Page Setup
You can set the paper size in the "Print Fonts Catalogue" and "Prints fonts Sam-
ple".
A
Select [Page Setup...] on the [File] menu.
B
Choose the paper size.
Printing the Font Catalog
You can print the names of fonts available on the machine.
Note
❒ The paper selected under [Page Setup] is used.
A
Select [Print Fonts Catalogue] on the [File] menu.
B
Click [Print].
Printer Utility for Mac
31
1