Sample Print
Follow the procedures below to print a document using the "Sample Print"
function.
Windows 95/98/Me
Note
❒ If the application has a collate option, make sure that it is not selected before
sending a print job. By default, sample print jobs are automatically collated
by the printer driver. If the collate option is selected in the application print
dialog box, more prints than intended may be printed.
A
From an application, select [Print] from the file menu.
The print dialog box appears.
B
Open the Printer Properties.
C
Click to select the [Setup] tab.
D
Select [Sample Print] in the [Job Type] box.
E
Click [Details].
F
Enter the "User ID" in [User ID]. This can consist of up to eight alphanumer-
ic (a-z, A-Z, 0-9) characters.
Note
❒ This is used to identify the user associated with a job.
❒ The "User ID" can consist of up to eight alphanumeric (a-z, A-Z, 0-9) char-
acters.
G
Click [OK].
H
Click [OK] to close the Printer Properties.
I
Set the number of copies to more than 2 and start printing from the appli-
cation's print dialog box.
The sample print job is sent to the machine and one set is printed.
J
Check the printed output to make sure that the settings are correct.
If the settings are correct, go to step
If you want to delete the saved job, see P.17 "Deleting a Sample Print File".
K
On the machine's control panel, press the { { { { Printer} } } } key to display the Print-
er screen.
K
to print the remaining sets.
Printing a Document
11
1