Eliminating The Bouncing Ball From The Main Screen; Using The V-Link Function - Roland Atelier AT-90SL Owner's Manual

Chapter 10 Various Other Settings
■ Eliminating the Bouncing Ball
from the Main Screen
You can set the main screen so that the bouncing ball does
not appear.
1.
Touch <System> on the Main screen.
The System screen appears.
2.
Touch < >< > to display the Main Bouncing
Ball.
3.
Touch the Main Bouncing Ball setting to switch
between "ON" and "OFF."
Each time you touch the Main Boucing Ball setting, it
will alternate between "ON" and "OFF."
Setting
The bouncing ball appears in the main
ON
screen.
The bouncing ball does not appear in
OFF
the main screen.
4.
Touch <Exit>.
This setting remains stored in memory even while power is
turned off.
202
Descriptions
Max Max Max Max
Min Min Min Min

■ Using the V-LINK function

Connecting the AT-90SL to a V-LINK compatible image
device allows you to control the images with the AT-90SL.
V-LINK
V-LINK ( ) is a function that allows music and
images to be performed together. By using MIDI to connect
two or more V-LINK compatible devices, you can easily
enjoy a wide range of visual effects that are linked to the
expressive elements of a music performance.
* V-LINK (
Corporation.
How to Use the V-LINK
1.
Touch <System> on the Main screen.
The System screen appears.
2.
Touch < >< > to display the V-LINK.
3.
Touch the V-LINK setting.
4.
Touch < >< > to change the setting.
Setting
OFF The V-LINK function is switched off.
The V-LINK function is switched on.
You can now control the video images
MODE 1
using the Registration buttons.
The V-LINK function is switched on.
You can now control the video images
using the twelve rightmost keys of the
lower keyboard and Registration
MODE 2
buttons.
No sound is produced when you press
any of the twelve keys at the right end of
the keyboard.
5.
Touch <Exit>.
Harmony Intelligence
) is a trademark of Roland
Descriptions