Deleting Performance Songs Stored On Floppy Disk - Roland Atelier AT-90SL Owner's Manual

Max Max Max Max
Min Min Min Min
If the following screen appears
The message below is shown when the performance song in
the unit has not been saved to disk.
fig.E-62
If you wish to erase the performance song
1.
Touch the <OK> button.
If you wish to save the performance song on a
floppy disk
1.
Touch the <Cancel> button.
Save the song on a floppy disk (p. 159).
If loading is canceled because the memory limit has been
reached, the following message will be displayed:
fig.E-30
Harmony Intelligence
Chapter 7 Recording/Playing Back What You Play
Deleting Performance Songs
Stored on Floppy Disk
You can delete a performance song that was saved onto a
floppy disk.
1.
Insert the floppy disk containing the performance
data into the disk drive.
2.
Touch <Rec/Play> on the Main screen.
The Rec/Play screen appears.
3.
Touch < > (Utility).
The Utility screen appears.
4.
Touch <Save/Delete>.
The Song Save/Song Delete screen appears.
fig.07-31_50
5.
Touch < >< > to select the performance data
that you wish to delete.
6.
Touch <Delete>.
The confirmation message appears.
fig.07-
If you touch <Cancel> the performance data will not be
deleted.
7.
When you touch <OK> the performance data will
be deleted.
161