Max
Max
Max
Max
Min
Min
Min
Min
Harmony Intelligence
If you press the Footage Type button, Lower Footage button, or Upper
Footage button to turn it on (button's indicator lit), a footage screen like the
following appears.
Footage Screen
When the Footage Type is "Flute"
The sliders displayed in the screen are called "harmonic bars."
By touching the harmonic bars and sliding them, you can adjust the volume
of each footage.
The volume can be adjusted over nine steps (0–8).
When a harmonic bar is pulled out all the way (8), the volume is loudest.
When it is pushed in all the way (0), there will be no sound.
When the Footage Type is "Pipe" or "Theater"
On
Off
The buttons displayed in the screen are called "tablets."
You can press each tablet to turn it on/off.
Chapter 1 Selecting and Playing Sounds
You can open the Upper
Footage (Flute) screen by
touching <Digital H-Bar>
on the Main screen.
The Footage screen will be
displayed for several
seconds, then it will close
automatically.
If you touch <Hold>, the
screen continues to be
displayed until you touch
<Exit>. When you touch
the Footage screen and
then change the settings,
the screen is held in that
condition.
You can touch <
> to
switch between the Upper
Footage screen and Lower
Footage screen.
51