Using The Foot Switches - Roland Atelier AT-90SL Owner's Manual

Using the Foot Switches

On either side of the expression pedal are two Foot Switches. Different
functions are assigned to each of these two foot switches.
fig.04-07
You can also change the functions assigned to the left and right Foot
Switches. Please refer to "Changing the Function of the Foot Switch" (p.
118).
With the factory settings, the following functions are assigned to the left and
right Foot Switches.
Right Foot Switch
Left Foot Switch
You can store functions to be assigned to the foot switch to individual
Registration buttons (p. 90).
Switch the Rotary effect between Fast/Slow.
If Rotary is turned on, the Rotary effect will switch
between "Fast" and "Slow" each time you press the Foot
Switch.
Glide (an effect by which the pitch is lowered by a
semitone while the foot switch is pressed, and is
returned to what is originally was when you release
your foot).
While you are pressing the Foot Switch, the pitch will be
temporarily lowered. When you release the Foot Switch,
the pitch will return to normal gradually.
Chapter 4 Using the Performance Functions
NOTE
If "Regist Shift" is turned
"RIGHT," "LEFT," or
"RIGHT +Load Next," the
foot switch will function
only to switch registrations
(p. 119).
The Glide effect will only
be applied to the keyboard
section that has been
specified as being the
destination for the Pitch
bend/Vibrato lever. Please
refer to "Selecting the
Range of Keys to Which
the Pitch Bend/Vibrato
Lever will Apply" (p. 188).
117