Roland Atelier AT-90SL Owner's Manual page 171

Chapter 8 Editing Your Musical Performance Data
6.
Touch < >< > to specify the "Event" (the
type of performance data that you wish to erase).
fig.08-12_50
Settings ALL, NOTE, PANEL, EXPRESSION, VOICE,
TEMPO
7.
When you're done making the settings, touch
<Exit>.
8.
Touch the "Track" value (the track from which
data will be erased).
9.
Touch < >< > to specify the "Track" (the
track from which data will be erased).
If you have selected EXPRESSION, VOICE and TEMPO
as the type of recording to be erased, you need not
specify the track.
Settings ALL, RHYTHM, ACCOMP, BASS, LOWER,
UPPER, SOLO, CONTROL
If you select "ALL," the recording will be erased from all
parts.
10.
When you're done making the settings, touch
<Exit>.
11.
Touch the "From" value (the measure at which
erasure will begin).
12.
Touch < >< > to set "From" (the measure at
which erasure will begin).
13.
When you're done making the settings, touch
<Exit>.
14.
Touch the "For" value (the number of measures
from which the data will be erased).
15.
Touch < >< > to set "For" (the number of
measures from which the data will be erased).
If you wish to erase to the last measure (bar), set "for:
ALL."
170
Max Max Max Max
Min Min Min Min
16.
When you're done making the settings, touch
<Exit>.
17.
Touch <Execute>.
The following display appears.
fig.08-06
To cancel operation, touch <Cancel>.
18.
Touch <OK> to erase the performance data.
Once the performance data has been erased, you are
returned to the Erase Event screen.
Harmony Intelligence