LG 23CAV42K Owner's Manual page 45

User Settings Window
In the User Settings window, the administrator can
access the tab to select the mouse and keyboard
and define the PCoIP image quality.
The User Settings window has the following tabs:
y VMware View
y Mouse
y Keyboard
y Image
y Display Topology
y Touch Screen
y VMware View Tab
The VMware View tab allows user to specify the
client behavior for when a user cannot check the
secure connection to a server.
<Figure 2-35: VMware View>
y Reject the unverifiable connection (Secure)
Connection can be established only when the
certificate is verified and otherwise it cannot.
y Warn if the connection may be insecure (De-
fault)
The authentication status is checked and a
warning message is displayed, if required.
However, there is no connection limit.
y Allow the unverifiable connection (Not Secure)
No authentication is required and no connec-
tion limit exists.
Using CLOUD Solution
y Mouse Tab
The Mouse tab allows the user to modify the OSD
and RDP session's mouse cursor speed setting.
NOTE
The OSD mouse cursor speed setting does
y
not affect the mouse cursor settings when a
PColP session is active unless the Local Key-
board Host Driver function is being used. (see
PColP Host Software User Guide for more
information).
The Mouse tab has no corresponding menu
y
in the Webpage Administration Interface of
Section 1.
<Figure 2-36: Mouse>
y Mouse Speed
The Mouse Speed field allows the user to set
the portal's mouse cursor speed.
NOTE
The Mouse Speed can also be configured via
y
the PCoIP Host Software. For more informa-
tion on using the PCoIP Host Software, refer
to the PCoIP Host Software User Guide.
45