LG 23CAV42K Owner's Manual page 39

<Figure 2-23: Advanced Settings for View Connec-
tion Server + Imprivata OneSign Connection>
y Remember Username
If this option is selected, the username which
is previously used to access the VMware View
Connection Server is automatically entered in
the username field.
y Use OSD logo for View banner
If this option is enabled, you can change the
OSD logo of PCoIP during the login.
NOTE
The OSD logo can be uploaded using the
y
Webpage Administration Interface.
y Prefer GSC-IS
If this option is selected, the GCS-IS interface
is used when a smart card supports more than
one interface. If the smart card supports only
one interface, it is not used.
NOTE
This setting is provided only when a smart
y
card is used.
y Enable Peer Loss Overlay
If this option is selected, the "Network Con-
nection Lost" message is displayed on the
screen when it is confirmed that the network is
disconnected.
The display is the same as in the VDI environ-
ment. The default is Disable.
NOTE
This setting is provided only for the client.
y
Using CLOUD Solution
y Enable Preparing Desktop Overlay
If this option is selected, the "Preparing Desk-
top" message is displayed on the screen when
the user is logged in.
y Disconnect Message Filter
This option determines the type of message to
display when a session is disconnected.
- Show All: Shows all the error messages.
- Show Error and Warning Only: Shows the
error and warning messages only.
- Show Error Only: Shows the error messages
only.
- Show None: Shows nothing.
y Connection Management Interface
In the Connection Management Interface set-
ting, you can manage the connection by enter-
ing the IP address for connection management
instead of using the IP address of the VMware
View Connection Server and can select to en-
able or disabled the management interface.
<Figure 2-24: Connection Management Interface Set-
ting>
y DNS Name or IP Address
Enter the DNS name or IP address of the VM-
ware View Connection Server.
39