LG 23CAV42K Owner's Manual page 36

36
Using CLOUD Solution
y View Connection Server with Auto-Logon
In the Session tab, you can select to enable
the user client to automatically access the
VMware View Connection Server.
To do this, select View Connection Server with
Auto-Logon for Connection Type.
<Figure 2-18: View Connection Server with Auto-
Logon Setting>
y DNS Name or IP Address
Enter the DNS name or IP address of the VM-
ware View Connection Server.
y Username
Enter the username for the user client.
y Password
Enter the password for the user client.
y Domain
Enter the domain name.
<Figure 2-19: Advanced Settings for View Connec-
tion Server with Auto-Logon>
y Desktop Name to Select
Enter the name of the pool/desktop which the
user client uses upon starting a session.
y Port
For the default setting, leave the port field
empty. When the VMware View Connection
Server uses the SSL authentication, enter 443
in the Port field.
If the server where a user tries to access uses
a port other than a general port, enter the port.
y Auto Connect
If this option is enabled, the selected VMware
View Connection Server is automatically con-
nected when the user client is powered on.
If the Auto Connect option is enabled, you
should turn the user client off and turn it on
again at least once.
y Remember Username
If this option is selected, the username which
is previously used to access the VMware View
Connection Server is automatically entered in
the username field.
y Auto Launch if Only One Desktop
If this option is selected, connection is estab-
lished to the desktop when there is only one
virtual desktop that a user wants to access.
y Use OSD logo for View banner
If this option is enabled, you can change the
OSD logo of PCoIP during the login.
NOTE
The OSD logo can be uploaded using the
y
Webpage Administration Interface.