LG 23CAV42K Owner's Manual page 33

<Figure 2-13: Advanced Settings for Direct to
Host>
y Enable Auto-Reconnect
If this option is selected, reconnection is
attempted automatically when a session is
disconnected or the user is logged off.
NOTE
This setting is provided only for the client.
y
y Enable Peer Loss Overlay
The "Connection Lost" message is displayed.
The display is the same as in the VDI environ-
ment. The default is Disable.
NOTE
This setting is provided only for the client.
y
y Enable Preparing Desktop Overlay
If this option is selected, the "Preparing Desk-
top" message is displayed on the screen when
the user is logged in.
y Disconnect Message Filter
This option determines the type of message to
display when a session is disconnected.
- Show All: Shows all the error messages.
- Show Error and Warning Only: Shows the
error and warning messages only.
- Show Error Only: Shows the error messages
only.
- Show None: Shows nothing.
Using CLOUD Solution
y Direct to Host + SLP Host Discovery
You can view the screen of the host PC by discov-
ering the host PC within the network and estab-
lishing 1:1 connection between the PCI host card
connected to the host PC and the portal.
<Figure 2-14: Direct to Host + SLP Host Discovery Set-
tings>
33