LG 23CAV42K Owner's Manual page 38

38
Using CLOUD Solution
<Figure 2-21: Advanced Setting for View Connec-
tion Server + Kiosk>
y Port
For the default setting, leave the port field
empty. When the VMware View Connection
Server uses the SSL authentication, enter 443
in the Port field.
If the server where a user tries to access uses
a port other than a general port, enter the port.
y Use OSD logo for View banner
If this option is enabled, you can change the
OSD logo of PCoIP during the login.
NOTE
The OSD logo can be uploaded using the
y
Webpage Administration Interface.
y Enable Peer Loss Overlay
If this option is selected, the "Network Con-
nection Lost" message is displayed on the
screen when it is confirmed that the network is
disconnected.
The display is the same as in the VDI environ-
ment. The default is Disable.
NOTE
This setting is provided only for the client.
y
y Enable Preparing Desktop Overlay
If this option is selected, the "Preparing Desk-
top" message is displayed on the screen when
the user is logged in.
y Disconnect Message Filter
This option determines the type of message to
display when a session is disconnected.
- Show All: Shows all the error messages.
- Show Error and Warning Only: Shows the
error and warning messages only.
- Show Error Only: Shows the error messages
only.
- Show None: Shows nothing.
y View Connection Server + Imprivata OneSign
Connection
Select View Connection Server + Imprivata
Onesign Connection to use the Imprivata One-
sign Connection for the client authentication.
<Figure 2-22: View Connection Server + Imprivata
OneSign Connection Setting>
y Bootstrap URL
Enter the IP address or FQDN information of
the server which performs the OneSign au-
thentication.