42
Using CLOUD Solution
Reset Tab
The Reset tab allows the administrator to reset all
configurable parameters stored in Flash.
NOTE
The Reset function can also be accessed
y
through the Webpage Administration Inter-
face.
<Figure 2-29: Reset>
y Reset Parameters
The Reset Parameters [Reset] buttons resets
all settings and configurations to the factory
default settings. When this button is pressed,
an OSD message is displayed. This is to
prompt the administrator and prevent acciden-
tal reset.
Diagnostics Window
In the Diagnostics window, the administrator can
access the window tab to diagnose the portal. The
Diagnostics window has the following tabs:
y Event Log
y Session Statistics
y PCoIP Processor
y Ping
Each tab has the Close button to close the window.
y Event Log Tab
The Event Log tab allows the administrator to view
and delete the event log messages from the portal.
NOTE
The event log (regardless of the quantity) can
y
also be reset using the Webpage Administra-
tion Interface.
<Figure 2-30: Event Log>
y View Event Log Message
The View Event Log Message field displays the log
messages accompanied by the timestamp infor-
mation. The following two buttons are available:
y Refresh
The Refresh button refreshes the displayed
event log messages.
y Clear
The Clear button clears all event log mes-
sages.