Connecting Lan/Peripherals; Lan Connection; Dvi Connection - LG 23CAV42K Owner's Manual

Connecting LAN/Peripherals

LAN connection

Connect the router or switch to the monitor using a
LAN cable as illustrated below.
LAN
Hub/Router
NOTE
The LAN cable is sold separately.
y
The following LAN cable type can be used:
y
Standard: IEEE 802.3 ETHERNET
If a device is connected into the earphone
y
out port via a LAN cable, you can adjust the
volume with the volume icon on PC taskbar.
Connect the LAN cable and the peripheral
y
devices prior to booting up the PC.
USING THE MONITOR SET

DVI connection

Transfers digital video signals from the Cloud Mon-
itor to an extended monitor.
Connect the Cloud Monitor to an extended monitor
using a DVI cable.
CAUTION
Connect the input signal
y
cable and tighten in the
direction of the arrow. To
prevent disconnection
secure the cable tightly.
Do not press on the screen for a prolonged
y
time. This may cause image distortion.
Do not display a still image on the screen
y
for a prolonged time. This may cause image
retention. If possible, use the screen saver.
NOTE
A converter can be used to convert the DVI-I
y
output signal to D-SUB input signal.
When connecting the power cord to the out-
y
let, use a grounded (3-hole) multi-socket or a
grounded wall outlet.
The monitor may flicker when turned on in an
y
area of low temperature. This is normal.
Sometimes red, green or blue spots may ap-
y
pear on the screen. This is normal.
13
DVI-I(D) IN
MONITOR