LG 23CAV42K Owner's Manual page 34

34
Using CLOUD Solution
<Figure 2-15: Advanced Settings for Direct to Host
+ SLP Host Discovery>
y Enable Auto-Reconnect
If this option is selected, reconnection is
attempted automatically when a session is
disconnected or the user is logged off.
NOTE
This setting is provided only for the client.
y
y Enable Peer Loss Overlay
The "Connection Lost" message is displayed.
The display is the same as in the VDI environ-
ment. The default is Disable.
NOTE
This setting is provided only for the client.
y
y Enable Preparing Desktop Overlay
If this option is selected, the "Preparing Desk-
top" message is displayed on the screen when
the user is logged in.
y Disconnect Message Filter
This option determines the type of message to
display when a session is disconnected.
- Show All: Shows all the error messages.
- Show Error and Warning Only: Shows the
error and warning messages only.
- Show Error Only: Shows the error messages
only.
- Show None: Shows nothing.
y View Connection Server
In the Session tab, you can select to enable the
user client to access the VMware View Connection
Server.
To do this, select View Connection Server for Con-
nection Type.
<Figure 2-16: View Connection Server Setting>
y DNS Name or IP Address
Enter the DNS name or IP address of the VM-
ware View Connection Server.