Roland RM-700 Midi Implementation Manual page 26

●0206: Enhancer→Chorus
This effect connects an enhancer and a chorus in series.
No Parameter Value
1 Enhancer Sens 0 - 127 0-127
2 Enhancer Mix 0 - 127 0-127
3 Chorus Pre 0 - 125 0.0-100.0 ms
Delay
4 Chorus Rate 0 - 1 Hz, note
Mode
5 Chorus Rate #1 1 - 127 0.05-10.00 Hz
6 Chorus Rate 0 - 21 note
7 Chorus Depth 0 - 127 0-127
8 Chorus Balance 0 - 100 D100:0W-
#2 D0:100W
9 Level 0 - 127 0-127
●0207: Enhancer→Flanger
This effect connects an enhancer and a flanger in series.
No Parameter Value
1 Enhancer Sens 0 - 127 0-127
2 Enhancer Mix 0 - 127 0-127
3 Flanger Pre 0 - 125 0.0-100.0 ms
Delay
4 Flanger Rate 0 - 1 Hz, note
Mode
5 Flanger Rate #1 1 - 127 0.05-10.00 Hz
6 Flanger Rate 0 - 21 note
7 Flanger Depth 0 - 127 0-127
8 Flanger 0 - 98 -98- +98 %
Feedback
9 Flanger Balance 0 - 100 D100:0W-
#2 D0:100W
10 Level 0 - 127 0-127
●0208: Enhancer→Delay
This effect connects an enhancer and a delay in series.
No Parameter Value
1 Enhancer Sens 0 - 127 0-127
#1
2 Enhancer Mix 0 - 127 0-127
3 Delay Mode 0 - 1 ms, note
4 Delay Time 0 - 127 1-2540 ms
5 Delay Time 0 - 21 note
6 Delay 49 - 89 0- +80 %
Feedback
7 Delay HF 0 - 17 200-8000 Hz,
Damp Bypass
8 Delay Balance 0 - 100 D100:0W-
#2 D0:100W
9 Level 0 - 127 0-127
26
Description
Sensitivity of the enhancer
Level of the overtones generated by
the enhancer
Adjusts the delay time from the
direct sound until the chorus sound
is heard.
When this is set to "note," the effect is
synchronized with the tempo.
Frequency of modulation (Hz)
Frequency of modulation (note)
Depth of modulation
Adjusts the volume balance between
the sound that is sent through the
chorus (W) and the sound that is not
sent through the chorus (D).
Output Level
Description
Sensitivity of the enhancer
Level of the overtones generated by
the enhancer
Adjusts the delay time from when
the direct sound begins until the
flanger sound is heard.
When this is set to "note," the effect is
synchronized with the tempo.
Frequency of modulation (Hz)
Frequency of modulation (note)
Depth of modulation
Adjusts the proportion of the flanger
sound that is fed back into the effect.
Negative (-) settings will invert the
phase.
Adjusts the volume balance between
the sound that is sent through the
flanger (W) and the sound that is not
sent through the flanger (D).
Output Level
Description
Sensitivity of the enhancer
Level of the overtones generated by
the enhancer
When this is set to "note," the effect is
synchronized with the tempo.
Adjusts the delay time from the
direct sound until the delay sound is
heard. (Hz)
Adjusts the delay time from the
direct sound until the delay sound is
heard. (note)
Adjusts the proportion of the delay
sound that is fed back into the effect.
Adjusts the frequency above which
sound fed back to the effect will be
cut. If you do not want to cut the high
frequencies, set this parameter to
Bypass.
Adjusts the volume balance between
the sound that is sent through the
delay (W) and the sound that is not
sent through the delay (D).
Output Level
●0209: Chorus→Delay
This effect connects a chorus and a delay in series.
No Parameter Value
1 Chorus Pre 0 - 125 0.0-100.0 ms
Delay
2 Chorus Rate 0 - 1 Hz, note
Mode
3 Chorus Rate 1 - 127 0.05-10.00 Hz
4 Chorus Rate 0 - 21 note
5 Chorus Depth 0 - 127 0-127
6 Chorus Balance 0 - 100 D100:0W-
#1 D0:100W
7 Delay Mode 0 - 1 ms, note
8 Delay Time 0 - 127 1-2540 ms
9 Delay Time 0 - 21 note
10 Delay 49 - 89 0- +80 %
Feedback
11 Delay HF 0 - 17 200-8000 Hz,
Damp Bypass
12 Delay Balance 0 - 100 D100:0W-
#2 D0:100W
13 Level 0 - 127 0-127
●020a: Flanger→Delay
This effect connects a flanger and a delay in series.
No Parameter Value
1 Flanger Pre 0 - 125 0.0-100.0 ms
Delay
2 Flanger Rate 0 - 1 Hz, note
Mode
3 Flanger Rate 1 - 127 0.05-10.00 Hz
4 Flanger Rate 0 - 21 note
5 Flanger Depth 0 - 127 0-127
6 Flanger 0 - 98 -98- +98 %
Feedback
7 Flanger Balance 0 - 100 D100:0W-
#1 D0:100W
8 Delay Mode 0 - 1 ms, note
9 Delay Time 0 - 127 1-2540 ms
10 Delay Time 0 - 21 note
11 Delay 49 - 89 0- +80 %
Feedback
12 Delay HF 0 - 17 200-8000 Hz,
Damp Bypass
13 Delay Balance 0 - 100 D100:0W-
#2 D0:100W
14 Level 0 - 127 0-127
Description
Adjusts the delay time from the
direct sound until the chorus sound
is heard.
When this is set to "note," the effect is
synchronized with the tempo.
Frequency of modulation (Hz)
Frequency of modulation (note)
Depth of modulation
Volume balance between the direct
sound (D) and the chorus sound (W)
When this is set to "note," the effect is
synchronized with the tempo.
Adjusts the delay time from the
direct sound until the delay sound is
heard. (Hz)
Adjusts the delay time from the
direct sound until the delay sound is
heard. (note)
Adjusts the proportion of the delay
sound that is fed back into the effect.
Adjusts the frequency above which
sound fed back to the effect will be
cut. If you do not want to cut the high
frequencies, set this parameter to
Bypass.
Adjusts the volume balance between
the sound that is sent through the
delay (W) and the sound that is not
sent through the delay (D).
Output Level
Description
Adjusts the delay time from when
the direct sound begins until the
flanger sound is heard.
When this is set to "note," the effect is
synchronized with the tempo.
Frequency of modulation (Hz)
Frequency of modulation (note)
Depth of modulation
Adjusts the proportion of the flanger
sound that is fed back into the effect.
Negative (-) settings will invert the
phase.
Volume balance between the direct
sound (D) and the flanger sound (W)
When this is set to "note," the effect is
synchronized with the tempo.
Adjusts the delay time from the
direct sound until the delay sound is
heard. (Hz)
Adjusts the delay time from the
direct sound until the delay sound is
heard. (note)
Adjusts the proportion of the delay
sound that is fed back into the effect.
Adjusts the frequency above which
sound fed back to the effect will be
cut. If you do not want to cut the high
frequencies, set this parameter to
Bypass.
Adjusts the volume balance between
the sound that is sent through the
delay (W) and the sound that is not
sent through the delay (D).
Output Level