Table of Contents
Advertisement
No
Parameter
Value
8
Rev Delay
0 - 127
0-127
Level
9
Low Gain
0 - 30
-15- +15 dB
10
High Gain
0 - 30
-15- +15 dB
11
Balance #2
0 - 100
D100:0W-
D0:100W
12
Level
0 - 127
0-127
●0172: Lo-Fi
This is an effect that intentionally degrades the sound quality for creative purposes.
No
Parameter
Value
1
Pre Filter Type
0 - 5
1-6
2
LoFi Type #1
0 - 8
1-9
3
Post Filter Type
0 - 2
Off, Lpf, Hpf
4
Post Filter
0 - 16
200-8000 Hz
Cutoff
5
Low Gain
0 - 30
-15- +15 dB
6
High Gain
0 - 30
-15- +15 dB
7
Balance #2
0 - 100
D100:0W-
D0:100W
8
Level
0 - 127
0-127
●0175: Telephone
No
Parameter
Value
1
Voice Quality
0 - 15
0-15
#1
2
Treble
0 - 30
-15- +15 dB
3
Balance #2
0 - 100
D100:0-
D0:100W
4
Level
0 - 127
0-127
●0156: Gate Reverb
This is a special type of reverb in which the reverberant sound is cut off before its natural
length.
No
Parameter
Value
1
Type #1
0 - 3
Normal,
Reverse,
Sweep1,
Sweep2
2
Pre Delay
0 - 125
0.0-100.0 ms
3
Gate Time
0 - 99
5-500 ms
4
Low Gain
0 - 30
-15- +15 dB
5
High Gain
0 - 30
-15- +15 dB
6
Balance #2
0 - 100
D100:0W-
D0:100W
7
Level
0 - 127
0-127
●0200: Overdrive→Chorus
This effect connects an overdrive and a chorus in series.
No
Parameter
Value
1
Overdrive
0 - 127
0-127
Drive
2
Overdrive Pan
0 - 127
L64-63R
3
Chorus Pre
0 - 125
0.0-100.0 ms
Delay
4
Chorus Rate
0 - 1
Hz, note
Mode
5
Chorus Rate #1
1 - 127
0.05-10.00 Hz
6
Chorus Rate
0 - 21
note
7
Chorus Depth
0 - 127
0-127
Description
Volume of the reverse delay sound
Amount of boost/cut for the low-
frequency range
Amount of boost/cut for the high-
frequency range
Volume balance of the original sound
(D) and the delay sound (W)
Output volume
Description
Selects the type of filter applied to the
sound before it passes through the
Lo-Fi effect.
Degrades the sound quality. The
sound quality grows poorer as this
value is increased.
Type of filter
Off: no filter is used
Lpf: cuts the frequency range above
the Cutoff
Hpf: cuts the frequency range below
the Cutoff
Basic frequency of the Post Filter
Gain of the low range
Gain of the high range
Volume balance between the direct
sound (D) and the effect sound (W)
Output level
Description
Audio quality of the telephone voice
Bandwidth of the telephone voice
Volume balance between the direct
sound (D) and the effect sound (W)
Output level
Description
Type of reverb
Normal: conventional gated reverb
Reverse: backwards reverb
Sweep1: the reverberant sound
moves from right to left
Sweep2: the reverberant sound
moves from left to right
Adjusts the delay time from the
direct sound until the reverb sound is
heard.
Adjusts the time from when the
reverb is heard until it disappears.
Gain of the low range
Gain of the high range
Volume balance between the direct
sound (D) and the reverb sound (W)
Output Level
Description
Degree of distortion
Also changes the volume.
Stereo location of the overdrive
sound
Adjusts the delay time from the
direct sound until the chorus sound
is heard.
When this is set to "note," the effect is
synchronized with the tempo.
Frequency of modulation (Hz)
Frequency of modulation (note)
Depth of modulation
No
Parameter
Value
8
Chorus Balance
0 - 100
D100:0W-
#2
D0:100W
9
Level
0 - 127
0-127
●0201: Overdrive→Flanger
This effect connects an overdrive and a flanger in series.
No
Parameter
Value
1
Overdrive
0 - 127
0-127
Drive
2
Overdrive Pan
0 - 127
L64-63R
3
Flanger Pre
0 - 125
0.0-100.0 ms
Delay
4
Flanger Rate
0 - 1
Hz, note
Mode
5
Flanger Rate #1
1 - 127
0.05-10.00 Hz
6
Flanger Rate
0 - 21
note
7
Flanger Depth
0 - 127
0-127
8
Flanger
0 - 98
-98- +98 %
Feedback
9
Flanger Balance
0 - 100
D100:0W-
#2
D0:100W
10
Level
0 - 127
0-127
●0202: Overdrive→Delay
This effect connects an overdrive and a delay in series.
No
Parameter
Value
1
Overdrive
0 - 127
0-127
Drive #1
2
Overdrive Pan
0 - 127
L64-63R
3
Delay Mode
0 - 1
ms, note
4
Delay Time
0 - 127
1-2540 ms
5
Delay Time
0 - 21
note
6
Delay
49 - 89
0- +80 %
Feedback
7
Delay HF
0 - 17
200-8000 Hz,
Damp
Bypass
8
Delay Balance
0 - 100
D100:0W-
#2
D0:100W
9
Level
0 - 127
0-127
●0203: Distortion→Chorus
The parameters are essentially the same as in "Overdrive→Chorus," with the exception of
the following two.
Overdrive Drive→Distortion Drive
Overdrive Pan→Distortion Pan
●0204: Distortion→Flanger
The parameters are essentially the same as in "Overdrive→Flanger," with the exception of
the following two.
Overdrive Drive→Distortion Drive
Overdrive Pan→Distortion Pan
●0205: Distortion→Delay
The parameters are essentially the same as in "Overdrive→Delay," with the exception of the
following two.
Overdrive Drive→Distortion Drive
Overdrive Pan→Distortion Pan
Description
Adjusts the volume balance between
the sound that is sent through the
chorus (W) and the sound that is not
sent through the chorus (D).
Output Level
Description
Degree of distortion
Also changes the volume.
Stereo location of the overdrive
sound
Adjusts the delay time from when
the direct sound begins until the
flanger sound is heard.
When this is set to "note," the effect is
synchronized with the tempo.
Frequency of modulation (Hz)
Frequency of modulation (note)
Depth of modulation
Adjusts the proportion of the flanger
sound that is fed back into the effect.
Negative (-) settings will invert the
phase.
Adjusts the volume balance between
the sound that is sent through the
flanger (W) and the sound that is not
sent through the flanger (D).
Output Level
Description
Degree of distortion
Also changes the volume.
Stereo location of the overdrive
sound
When this is set to "note," the effect is
synchronized with the tempo.
Adjusts the delay time from the
direct sound until the delay sound is
heard. (Hz)
Adjusts the delay time from the
direct sound until the delay sound is
heard. (note)
Adjusts the proportion of the delay
sound that is fed back into the effect.
Adjusts the frequency above which
sound fed back to the effect will be
cut. If you do not want to cut the high
frequencies, set this parameter to
Bypass.
Adjusts the volume balance between
the sound that is sent through the
delay (W) and the sound that is not
sent through the delay (D).
Output Level
25
Advertisement
Table of Contents
