Inserting zippers
Preparation before attaching zipper
Runstitching ... Stitch length "Automatic"
Crotch end
Reverse stitch (1cm)
Fabric
(wrong side)
(right)
Pattern No.
Direct 1
Zipper presser foot
Presser foot
(B)
Machine basting ...
Stitch length "4"
(left)
Zippers are set in two different ways: by inserting into
the side seam of the garment and by centering in
position.
* Make sure to use center needle position
(Stitch pattern No. Direct 1).
1
Use the standard presser foot (A) to sew.
Place the fabrics face-to-face. Check the runstitching
length and the length of the zipper to be inserted.
Machine baste the zipper onto the fabrics.
Machine basting = zipper opening length + 1 cm
2
Attach the zipper presser foot (B) to the
machine.
When sewing the left side of the zipper, place the
zipper under the right portion of the zipper presser
foot. When sewing the right side of the zipper, place
the zipper under the left portion of the foot.
Attention
Turn OFF the power switch
before replacing the presser
foot.
54
55