Buttonhole Stitches - JUKI HZL-F series Instruction Manual

Buttonhole stitches

* The buttonhole length is automatically determined only by placing a button on the buttonhole
presser foot.
* The machine can sew buttonholes for buttons with diameters of 0.7 - 3.2 cm.
* In case of stretchy fabrics, use non-elastic interlining on the wrong side of the fabric.
* Make sure to perform test sewing to see that the machine sews buttonholes correctly.
* Buttonhole Nos. 09 - 12 are for knit fabrics and should be used with a knit needle.
Buttonhole type
Buttonhole for medium to
0
heavy weight materials
Standard buttonhole
Stitch length is larger.
01
Buttonhole for heavy weight
materials
02
Sews buttonhole double
Manual 2-step buttonhole
Use this buttonhole, when there is
an overlapped section in the fabric
03
or when you want to sew larger
buttonhole than 3.2cm diameter.
(Refer to page 50)
Buttonholes for women's
04
blouses and children's
clothes.
Also for light weight
05
materials
Keyhole buttonhole for
06
heavy weight materials such
as suits, jackets, coats, etc.
07
Round keyhole
Large and thick keyholes for
08
heavy weight materials
Pattern
number
Direct 0
Pattern No. Buttonhole 01, 02,
04~15
Buttonhole presser
Presser foot
foot (E)
Turn OFF the power switch
before replacing the presser
foot.
Buttonhole for light weight knit
09
(also used as decorative
buttonhole)
Buttonhole for medium weight
10
knit (also used as decorative
buttonhole)
Buttonhole for light weight knit
11
Sews buttonhole double
Buttonhole for medium weight
12
knit
Sews double buttonhole
13
Decorative buttonholes
14
Decorative buttonhole which
look like hand-sewn
15
Attention
44
45