Walking Foot; Auxiliary Spool Pin; Wide Table; Quilt Guide - JUKI HZL-F series Instruction Manual

● Smooth presser foot
This presser foot is used for non-slippery
materials like vinyl and satin stitches.
● Eyelet punch
This is to open hole at round area of keyhole
buttonhole.
● Wide Table
For sewing large projects such as quilts, etc.
● Open toe presser foot
This presser foot is used for appliqué and
decorative stitches. (Front part of the presser
foot is open for better visibility.)
● Edge sewing presser foot
This presser foot is used for patchwork, sewing
center line of joined materials by using the center
guide of the presser foot.
● Walking foot
F400 F300
● Auxiliary spool pin
F400 F300
● Quilt presser foot
F400 F300
● Patchwork presser foot
F400 F300
● Quilt guide
F400 F300
● Knee lifting lever
This presser foot is used for "difficult-to-feed"
materials such knit, jersies, vinyl, artificial leather
and leather or quilting.
This spool pin is used for twin needle sewing or
for bobbin thread winding.
This presser foot is used for quilt stitches (free
motion quilting).
This presser foot is used for patchwork stitches.
This is a guide is to sew lines in the same
distance.
You can raise or lower presser foot by knee,
without using your hand.
F300
F300
F300
F300
F300
F300
92
93