Connecting To The Power Supply; Buttons - JUKI HZL-F series Instruction Manual

Connecting to the power supply

Connecting to the
power supply
WARNING (For U.S.A.,Canada only)
This appliance has a polarized plug (one blade wider than the
other). To reduce the risk of electric shock, this plug is intended
to fit in a polarized outlet only one way. If the plug does not fit fully
in the outlet, reverse the plug. If it still does not fit, contact a
qualified electrician to install the proper outlet. Do not modify the
plug in any way.
Power switch
Machine-socket-inlet
8
• Disconnect the plug and turn off the power
switch (turn to "O") that always sewing machine
is not to use.
Operating power switch:
Turn OFF the machine, set the power switch to "0"
Turn ON the machine, set the power switch to "I"
OFF
ON
Plug In case Start/stop button is used:
1. Turn OFF the power switch (turn to "O")
2. Insert cord-connector into machine-socket-inlet.
3. Insert plug into socket-outlet.
4. Turn ON the power switch. (Turn to "I")
Warning