Attaching The Connecting Rod; For The Operator; Operation Of Sc-500 - JUKI DDL-8700 Instruction Manual

7. Attaching the connecting rod

WARNING :
To protect against possible personal injury due to abrupt start of the machine, be sure to start the
following work after turning the power off and a lapse of 5 minutes or more.
3
2
A
1
B

3 FOR THE OPERATOR

1. Operation of SC-500

6
5
4
1) Fix connecting rod 1 to installing hole B of pedal
lever 2 with nut 3.
2) Installing connecting rod 1 to installing hole A will
lengthen the pedal depressing stroke, and the pedal
operation at a medium speed will be easier.
1) Press ON button
the power.
(Caution) When the buzzer is kept beeping
immediately after turning ON the power,
press OFF button 2 on the sewing machine
to turn OFF the power since connection of
the cord or power voltage may be wrong.
2) When the needle bar is not in its UP position, it
automatically rotates to reach the UP position.
(Caution)
1. When turning ON the power for the first
time, it will be slightly delayed since
initialization is performed.
2. When turning ON the power, do not place
your hands under the needle.
3) When depressing front part 4 of the pedal, the
sewing machine rotates at the number of
revolutions in accordance with the depressing
amount.
When the pedal is returned to the neutral position,
the sewing machine stops.
4) When lightly depressing back part 5 of the pedal,
the presser goes up. (PFL type only)
5) When strongly dpressing back part 6 of the pedal,
thread trimming is performed.
(Caution) For KFL and PFL types, thread trimming
entering point is different from each other.
11
of the power switch to turn ON