Initialization Of The Setting Data; Maintenance; Replacing The Fuse - JUKI DDL-8700 Instruction Manual

11. Initialization of the setting data

6
2

4. MAINTENANCE

1. Replacing the fuse

WARNING :
To prevent personal injuries caused by electric shock hazards or abrupt start of the sewing machine,
remove the cover after turning OFF the power switch and a lapse of 5 minutes or more. To prevent
personal injuries, when a fuse has blown out, be sure to replace it with a new one with the same
capacity after turning OFF the power switch and removing the cause of the blown-out of the fuse.
4
3
All contents of function setting of SC-500 can be
returned to the standard set values.
1) Pressing all switches 2, 3 and 4, turn ON the
power switch.
2) LED displays indication 6 with the sound "peep",
and initialization starts.
3) The buzzer sounds after approximately one second
(single sound three times, "peep", "peep", and
"peep"), and the setting data returns to the standard
setting value.
(Caution) Do not turn OFF the power on the way
of initializing operation. Program of the
main unit may be broken.
4) Turn OFF the power switch, and turn ON the power
switch again to return to the normal mode.
(Caution)
1. When this operation is performed, the
neutral compensation value of the pedal
sensor becomes "0". Accordingly, be sure
to execute the operation of automatic pedal
sensor neutral compensation before using
the sewing machine. (Refer to page 32.)
2. Even when this operation is performed, the
sewing data set by the operation panel
cannot be initialized.
1) Press the OFF button of the power switch to turn
OFF the power after confirming that the sewing
machine has stopped.
2) Draw out the power cord coming from the power
plug socket after confirming that the power switch
is turned OFF. Perform the work of step 3) after
confirming that the power has been cut and it has
passed for 5 minutes or more.
34