JUKI DDL-8700 Instruction Manual page 19

3
1 4
3
1 4
(Caution) When the specified number of stitches
is insufficient, there is a case where the
sewing machine cannot stop within the
specified number of stitches depending on
the speed of rotation of the sewing
machine.
4 One-shot automatic stitching setting function
(Function setting No. 76)
Press /
function setting No. 76.
It is possible to change the set value with
switch 3 or
0 : Pedal designated speed is prior.
1 : Automatic operation
(Caution) It is rendered effective when the material
end sensor function is set.
It is not possible to prohibit the one-shot
operation at the time of the overlapped
stitching operation.
Speed of rotation is the speed set at the
function setting No. 38.
a
5 Thread trimming prohibition function setting
(Function setting No. 9)
Thread trimming operation at normal stitching and
overlapped stitching can be prohibited by selecting
the thread trimming prohibition.
Press /
function setting No. 9.
It is possible to change the set value with
switch 3 or
0 : Thread trimming is effective.
1 : Thread trimming is prohibited.
a
17
switch 1 to advance to the
switch 4.
When "1" is selected, the one-
shot automatic stitching display
lights up when the mode is
returned to the normal one.
switch 1 to advance to the
switch 4.
When "1" is selected, the thread
trimming prohibition display lights
up when the mode is returned to
the normal one.