Function Setting List - JUKI DDL-8700 Instruction Manual

4. Function setting list

No.
Item
The number of stitches to be sewn at a low speed when the soft-start
Soft start
function is used at the start of sewing.
function
1
0 : Soft-start function is not operative.
Material end sensor function (used in case of without panel).
Material end
0 : Material end detection function is not operative.
sensor function
1 : After detecting material end, the specified number of stitches (No.
2
Thread trimming function by material end sensor (used in case of without
Thread trimming
panel).
function by
0 : Automatic thread trimming function after detection of material end
material end
3
sensor
1 : After detecting material end, the specified number of stitches (No.
Number of stitches for material end sensor (used in case of without panel).
Number of
Number of stitches from detection of material end to stop of the sewing
stitches for
4
machine.
material end
sensor
Flicker
Flicker reducing function (If the hand lamp flickers).
5
reducing
0 : Flicker reducing function is not operative.
function
1 : Less effective
Bobbin thread Bobbin thread counting function
counting 0 : Bobbin thread counting function is not operative.
6
function 1 : Bobbin thread counting function is operative.
Unit of bobbin Unit of bobbin thread counting down
thread 0 : Count/10 stitches
7 counting down 1 : Count/15 stitches
2 : Count/20 stitches
Number of Sewing speed of reverse feed stitching
rotation of
* 8 reverse feed
stitching
Thread
Thread trimming prohibiting function (used in case of without panel).
trimming
0 : Thread trimming prohibiting function is not operative.
9
prohibiting
1 : Thread trimming is prohibited.
function
Setting of
Position of needle bar is specified when the sewing machine stops.
needle bar
0 : Predetermined lowest position
stop position
1 : Predetermined highest position
10
when the
sewing
machine stops.
Click sound of Click sound of key switch mounted on PSC is specified.
key switch 0 : Click is not operative.
11
mounted on 1 : Click is operative.
PSC
Switching of function of optional switch.
Optinal switch
0 : No function
function
1 : Needle up/down compensating stitching
selection
2 : Back compensating stitching
12
3 : Function of canceling once reverse feed stitching at the end of sewing
4 : Thread trimming function
5 : Presser foot lifting function
6 : One stitch compensating stitching
7 : Function of simultaneously canceling reverse feed stitching at the
8 : Presser foot lifting function when pedal is neutral
Function of
Function of prohibiting start of the sewing machine by bobbin thread counting
prohibiting start
0 : When counting is out (-1 or less) Function of prohibiting start of the
of the sewing
machine by
1 : When counting is out (-1 or less) Function of prohibiting start of the
13
bobbin thread
counter
2 : When counting is out (-1 or less), the sewing machine stops once.
Sewing
Counting function of sewing (number of completion of process)
counter
0 : Sewing counter function is not operative.
14
1 : Sewing counter function is operative.
Number of times Number of times of detection of run-out of bobbin thread remaining amount
of detection of
run-out of bobbin 1 to 19 : Number of times during which the signal is not made even if
15
thread remaining
amount
Function of Function of lifting presser foot when the pedal is in neutral position.
neutral presser 0 : Function of neutral automatic presser lifting is not operative.
21
lifting 1 : Selection of function of neutral presser lifting.
* Do not change the set values with asterisk (*) mark as they are functions for maintenance. If the standard set value set at the
time of delivery is changed, it is in danger of causing the machine to be broken or the performance to be deteriorated.
If it is necessary to change the set value, please purchase the Engineer's Manual and follow the instructions.
(Descriptions of setting in this list are the standard values at the time of delivery of DDL-8700.)
However, contents of function setting are subject to change for improvement of function and performance without notice.
Description
4) will be sewn, and the sewing machine will stop.
is not operative.
4) will be sewn, and the sewing machine will stop and perform
automatic thread trimming.
8 : Highly effective
(Output of solenoid is prohibited. : Thread trimmer and wiper)
start and end of sewing
sewing machine is not operative.
sewing machine after thread trimming is operative.
Function of prohibiting start of the sewing machine after thread
trimming is operative.
0 : Function of bobbin thread remaining amount is not operative.
run-out of bobbin thread remaining amount is detected.
Setting
range
0 to 9
(Stitches)
0 to 19
(Stitches)
0 to 8
0 to 2
150 to 3,000
(r.p.m.)
0 to 8
0 to 2
0 to 19
20
Indication of
function setting
1
0/1 2
3
0/1
4
5
6
0/1
7
8
1 9 0
0/1 9
0/1
1 0
1 1
0/1
1 2
1 3
0/1
1 4
1 5
0/1 2 1
Ref.
page
24
0
0 24
0
24
5
24
0
24
1
24
0
0
0
24
24
0
1
25
25
0
0
1
25
1
0 25