JUKI DDL-8700 Instruction Manual page 21

Specified
No.
1
2
1
2
1
2
5
3
4
5
3
4
4) When you want to advance the setting No., press
switch 2 to advance the setting No.
When you want to return the setting No., press
switch 1 to return the setting No.
(Caution) When switch 1 (switch 2) is held
pressing, the setting No. will return (will
advance) continuously. When the setting
No. is advanced (returned), the contents
which are before by one (after by one) will
be determined. So, be careful when
changing the contents (up/down switch is
touched).
EXAMPLE) C H A N G I N G
REDUCING FUNCTION (SETTING No. 5)
Press switch 2 five times to set the setting No. to "5".
Press switch 4 five times to change the set No. to "5"
since the current set value is displayed on LED 5.
(Standard : "0")
(Caution) Keep pressing switch 4 or switch 3,
and the setting vaue can be changed
continuously.
5) When the change has been completed, press
switch 1 or 2 to specify the changed value.
(Caution)
1. When turning OFF the power before
performing this work, the contents which
have been changed are not updated.
2. Press switch 1, and screen display will
change to the contents of the setting No.
which is before by one.
3. Press switch 2, and screen display will
change to the contents of next setting No.
After completing the operation, turn OFF
the power and turn ON the power again to
return to the normal operation.
After completing the operation, turn OFF the power
and turn ON the power again to return to the normal
operation.
19
T H E F L I C K E R