Replacing The Optional Management Processor Card Battery; Replacing The Base Unit - HP Integrity rx1620 Maintenance Manual

Hide thumbs Also See for Integrity rx1620:

Table of Contents

Figure 62 Location of Management Processor Battery

Lift up on the battery and push on the back of it with a flat-head screwdriver to remove the

battery from its holder.

CAUTION:

battery holder retaining clip may damage the clip.

Replacing the Optional Management Processor Card Battery

Lift up on the battery holder retaining clip with a flat-head screwdriver and slide the battery

into the holder. The positive (+) terminal of the battery faces up.

CAUTION:

battery holder retaining clip may damage the clip.

Perform all of the steps described in the procedure for Replacing the optional management

processor card.

Use this checklist to verify all parts from the original system have been moved to the base unit.

NOTE:

Be sure to copy PRODUCT NUMBER, SERIAL NUMBER and UUID values onto the blank

labels and apply them to the base unit.

Removing and Replacing Components

Only lift the battery high enough to clear the holder. Excessive stress on the

Table of Contents