HP Integrity rx1620 Maintenance Manual page 67

1. Remove the following components from your existing base unit. Refer to earlier sections of this
chapter for component removal and replacement instructions.
Power Supply Fans
Power Supply
Chassis Fans
Management Processor card (optional card, may be present)
Management Processor Blank (present when Management Processor not installed)
PCI I/O Backplane Assembly
CPU(s) and associated Power Pods
CPU Airflow guide (single CPU systems only)
Memory DIMMs
DVD or CD-ROM
DVD Filler (present when a DVD or CD-ROM is not installed)
Disk(s)
Disk Filler(s) (present on disk-less systems)
Display Panel
Figure 63
2. Install the previously removed components into the new base unit. Refer to earlier sections of
this chapter for component removal and replacement instructions.
Power Supply Fans
Power Supply
Chassis Fans
Management Processor card (optional card, may be present)
Replacing the Base Unit 67