Manual Release - Genie GCL-GCX Manual

Manual Release

NOTE: In case of power failure, door can be operated manually.
The operator can be disconnected from door by pulling red pull rope attached to
Drop Release Lever to allow opening door. FIG. 8.
• When door is in manual operation, limit switch setting is not affected.
• Releasing pull rope will re-engage operator.
1) Install Release Cord.
2) Locate and install the wall control.
3) Locate and install Warning Placard. FIG. 9.
4) Remove four (4) self-tapping screws from front panel of the enclosure and
remove front panel to expose control circuits and allow for installation of to
any optional accessory board.
GCL-GCX GCL-GCX
Counter Door Operator
FIG. 8.
www.geniecompany.com
Figure 8
DROP RELEASE LEVER
(install release cord here)
Figure
Warning Placard
MUST BE ATTACHED
ADJACENT
9
to push button.
08-12
111735 00 1
4.3